ToolGrit
Explore Tools
Agriculture Free Pro Features Available

Grain Moisture Shrink Calculator — Physical Shrink vs. Elevator Shrink

See the hidden margin in your elevator's shrink factor and the real dollar impact

Calculate the actual physical weight loss from drying grain versus the shrink factor your elevator applies. Most elevators use a shrink factor that exceeds true physical shrink — this tool shows you exactly how much extra you're paying and the dollar impact at current commodity prices.

Pro Tip: The industry-standard physical shrink formula is 1.183% per point of moisture removed from corn. If your elevator charges 1.4% per point, that 0.217% difference adds up fast on big loads.

Compare on-farm drying cost vs. elevator charges

Grain Drying Cost Estimator →
Start Using This Tool See How It Works
Grain Moisture Shrink Calculator
Pop Out

How It Works

  1. Enter Moisture Levels

    Input the initial (wet) moisture percentage and target (dry) moisture percentage.

  2. Enter Elevator Shrink Factor

    Input the per-point shrink factor your elevator charges. Common values range from 1.2% to 1.5% per point.

  3. Enter Bushels and Price

    Input the number of wet bushels and the current commodity price to see the dollar impact of physical vs. elevator shrink.

Built For

  • Farmers evaluating elevator vs. on-farm drying economics
  • Grain merchandisers calculating net deliverable bushels
  • Farm managers comparing elevator shrink schedules

Frequently Asked Questions

Elevators build in a margin above true physical shrink to cover handling loss, moisture rebound, and profit. A typical elevator charges 1.3-1.5% per point while physical shrink is only 1.183% per point for corn. The difference is their margin on shrink.
For corn: Physical shrink (%) = (initial moisture - target moisture) × 1.183. This accounts for the fact that removing water reduces total bushel weight. The 1.183 factor is derived from the weight-moisture relationship.
No. The 1.183% per point factor is specific to corn. Soybeans use approximately 1.175%, wheat approximately 1.176%. The differences are small but add up on large volumes.
Disclaimer: Physical shrink calculations use standard industry formulas. Actual shrink varies with grain condition, handling method, and storage time. Verify elevator shrink schedules directly with your buyer.

Learn More

Agriculture

What Size Grain Bin Do I Need?

How to calculate grain bin capacity using real geometry, account for peaked vs level fill, factor in moisture shrink, and match your auger to the bin.

Read Guide →

Related Tools

Agriculture Live

Grain Bin Capacity Calculator

Calculate bushel capacity for flat-bottom and hopper-bottom grain bins. Enter diameter, eave height, and commodity to get level fill, peaked fill, and partial fill volumes with weight estimates.

Launch Tool →
Agriculture Live

Grain Drying Cost Estimator

Calculate on-farm grain drying cost per bushel including fuel, shrink, and labor. Compare against elevator docking charges to find the cheaper option for your operation.

Launch Tool →
Agriculture Live

Auger & Conveyor Sizing Calculator

Find the right auger diameter for your target bushels per hour. See capacity derating by angle and commodity, HP requirements, and time to fill a bin.

Launch Tool →